M A C F I E L D I N D I A , plastic auxiliary equipments,injection moulding machines, extrusion blow moulding machines, injection blow moulding machines, pet blow moulding machines, insert moulding machines,

Features:
·Hot medium liquid : water or oil convertible
Either water or oil can be used as a hot medium liquid according to the needs of mold forming temperature.Its high selectivity is certain to bring in high economic efficiency.

·Vertical pump
The flow of vertical pump can be always kept steady and its service life keeps long.

·Stainless medium tank
This interior tank will not get rust for long term,which is sure to prevent from any blockade of pipes and keep long-term service of pump.

·Transparent water (oil) level viewer
The transparent water (oil) level viewer can easily be used to view and inspect the quantity of medium liquid and be reminded to refill the medium liquid from time to time.

·Automatic alarming device
While water (oil) shortage occurs in the container,this device will automatically light up and start alarming and cut off the electric power of heaters and pumps, thus to guarantee their safety.

·High-precision automatic temperature control
The measure of temperature is very sensitive and accurate,little change of temperature helps to keep products both fine and delicate.

·Minimize products wastage
The mold can reach the required temperature right at the beginning of operation,thus can obviously minimize products shortage.

·Maintain proper temperature.
Either in continuous operation or in temporary shutting down, mold-forming temperature can always be kept proper to guarantee the best quality of products and further improve the forming process.

·Compact in size, light in weight
Easy to install, convenient to operate, convenient to move and little room to occupy.

Features

Both mixing pail and vane are made of stainlesssteel, easy to clean and absolutely no pollution.
The chain safety device can protect the safety ofoperator and machine.
The material is thick ,strong and durable.
Well-distributed mixing can be done in a shot time, low energy consumption and high efficiency.
Time setting can be controlled easily and preciselyin the range of 0-15 minutes.

Features：

The knife tool is refined with imported special tool-steel, the clearance between knife tools are adjustable, when it becomes blunt by using,it can be dismounted repeatedly, it is durable.
Use high-intensity steel screws to fasten the knife leaf and knife seat, having strong bearing capacity.
All walls of crushing chamber are treated by sound-proof, so having extra-low noise.
A discount-type designed, the bunker, main body, screen can be dismounted for cleaning easily.
The electric motor has over-loading protection with power source interlock protection device. Double-safety protection for operators and electric motor.

Features

The display screen shows re-producing temperature setting and actual temperature.
The dew point of dried wind hit -50^o C.
Main power switch with mechanical interlock function.
The dehumidification system adopts double cooler structure, can guarantee very low return wind temperature and dew point.

Type	Regen.Heater Power (kw)	Dry Air Flow (m3/hr)	Weight (kg)	External size (cm)	Pipe Size (lnch)
XD-90	3.5	90	120	900×520×1700	2"
XD-120	3.5	120	140	900×620×1700	2"
XD-150	4	150	215	1300×700×1700	2.5"
XD-200	5.4	200	225	1300×700×1700	2.5"
XD-300	7.2	300	240	1300×700×1800	3"
XD-400	7.2	400	280	1300×700×1800	3"
XD-500	10	500	290	1500×1000×1800	4"
XD-700	10	700	300	1500×1000×1800	4"

Features

The main engine and the material hopper are designed separately, and thus it is safe, easy and convenient to be operated.
The whole operation is controlled by MicroTrip computer.
Equipped with an independent filter, which is very convenient to clean up dust.
The equipped muffler reduces the noise in operation.
Stainless steel material hopper is light in weight, durable and very convenient for cleaning the device.
The control box,being designed separately, is easy to be well maintained.
Auto-buzzer will give alarm while lacking material.
Auto-protective device protects motor against overloading.

Model	XG-2840	XG-3460
Power(kw)	7.5	15
Feeding fan power(kw)	1.5	2.2
Quantity of rotating blades	21	24
Quantity of fixed blades	2	4
Size of feeding inlet(mm)	400×240	600×310
Max.Breaking capacity(kg/hr)	400-600	700-900
Noise dB(A)	80-85.6	80-85.6
Screen size(mm)	Ø10	Ø12
Crushing conveying device	风机	风机
Feeding increased fan power(kw)	1.5	2.2
Dust separation system	选配	选配
Amounted magnetic iron on charging inlet	选配	选配

Features

Compressor is used "COPELAND" brand which made in the USA.The inside safety protection can guarantee the long lasting of the chiller well.The pump is used made in Taiwan and all parts of cooling system are imported from the USA.Mexico.Denmark and Japan.
Equipped with shellpipe condenser and stainless steel cased evaporator,which are quite easy to be cleaned and maintained.Equipped with automatic water supply device in the water-tank.Air cooled cased chiller with board type evaporator is suitable for the district of lack of water resource and district of poor water quality.
Larger than model XC-20 are assembled 2 sets or 4 sets of compressors,so they are able to used as separate or together to reduce the resource waste.
Complete with safety protection and error indication system,including compressor over load protection,pump over load protection,high pressure and low pressure protection and phase failure protection.
Equipped with figure intellectualized temperature controls,which can accurately measure and control water temperatuer within the range of 5℃~35℃.

Features

With date ever memory and storage function;
Use Dcnon-blush motor, without maintenance requirements;
Micro-computer control, intenllent accurate;
Can meet the requirements of external signal input;
The screw bar is plated of chromium is durable and long using life;
Mouldue type assembled structure, easy for mounting and dismounting, convenient for clean and replacement;
Single color plastic masterbatch mixer, its typocal base amounted magnetic iron for three pipe buncker;
The stirrer base are typical double color plastic masterbatch mixer, can meet customer's requirement for two color mixing;
The main bunker are typical equipment of double plastic masterbatch mixer, the single color is also available.

Features:

Well-distribute Heated Wind
The heat efficiency is high enough to shorten great amount of drying time.
Precise Temperature Controls
The precise temperature controls ensure and keep a high accuracy of temperature.
Save Time and Manpower
As the hopper body and bottom are designed separately, and therefore it is very convenient to clean materials and quite simple and quick to renew materials as well.
The Trustworthy Design
Fine exterior,solid construction.Short material-melting time greatly helps to promote the spouting speed.

Features

Both mixing pail and vane are made of stainless steel, easy to clean and absolutely no pollution.
The chain safety device can protect the safety ofoperator and machine.
The material is thick, strong and durable.
Well-distributed mixing can be done in a shot time, low energy consumption and high efficiency.
Time setting can be controlled easily and precisely in the range of 0-15 minutes.

Features

The knife tool is refined with imported special tool-steel, the clearance between knife tools are adjustable, when it becomes blunt by using, it can be dismounted repeatedly, it is durable.
Use high-intensity steel screws to fasten the knife leaf and knife seat,having strong bearing capacity.
All walls of crushing chamber are treated by sound-proof, so having extra-low noise.
A discount-type designed, the bunker, main body, screen can be dismounted for cleaning easily.
The electric motor has over-loading protection with power source interlock protection device. Double-safety protection for operators and electric motor.
Step-type motion knife design with strong breaking capacity.

Features:

Highly finished durable cutting tools made of imported special steel.
Recovery within 30 seconds
Slow speed with sound insulation.
Equipped with double spacing switch for efficient safe operation.
Antitrust inlet hopper device which can effectively prevent from leakage & pollution during grinding process.
Perfectly designed outlet hopper makes it convenient for operators to clean the machine easily.

Model	XCM-6-W	XCM-9-W	XCM-12-W	XCM-6-O	XCM-9-O	XCM-12-O	XCM-6-O (2D)	XCM-12-O (2D)
Temp	Water 95 (120)°C			Oil 150(200°C)
Hezt Capacity	6Kw	9Kw	12Kw	6Kw	9Kw	12Kw	6Kw×2	12Kw×2
Pump Power	0.37Kw	0.75Kw	0.75Kw	0.37Kw	0.75Kw	0.75Kw	0.37Kw×2	0.75Kw×2
Max.Pump Volume	40L/min	100L/min	120L/min	40L/min	100L/min	120L/min	40L/min×2	120L/min×2
Max.Pump Pressure	30m	40m	60m	30m	40m	60m	30m	60m
Pump mold	Horizontal
Cooling Method	Direct or indirect cooling			indirect cooling
Mold Connecting	3/8″ 2×2	3/8″ 4×2	3/8″ 4×2	3/8″ 2×2	3/8″ 4×2	3/8″ 4×2	3/8″ 4×2	3/8″ 4×2
External size (mm)	580×350 ×780	680×350 ×780	680×350 ×780	580×350 ×780	680×350 ×780	680×350 ×780	900×450 ×950	900×450 ×950
Weight	62kg	90kg	110kg	75kg	100kg	125kg	120kg	140kg

Model	XHS50kg	XHS100kg
Power	380V 3Φ	380V 3Φ
Motor power	1.5kw	3kw
Mixing capacity	50kg/3min	100kg/3min
SIze(LxMxH)	860x740x1110mm	1200x1150x1480mm
Welght	150kg	230kg

Model	XFS180	XFS230	XFS300	XFS400	XFS500	XFS600	XFS800	XFS1000
Power (kw)	2.2	4	5.5	7.5	11	15	22	37
Quantity of rotating blades	9	6	9	12	15	18	24	30
Quantity of fixed blades	2	2	2	2	2	4	4	4
Screen size (mm)	Φ8	Φ8	Φ10	Φ10	Φ10	Φ12	Φ12	Φ14
Weight(kg)	240	340	480	660	900	1400	1950	2500
Max.breaking capacity (mm)	100-150	150-200	200-300	400-600	500-700	600-800	700-900	800-1000
Size of feeding inlet (mm)	180×136	230×170	300×210	400×240	500×300	600×310	800×400	1000×400
External size (mm)	730×440 ×900	1000×700 ×1050	1100×800 ×1200	1300×900 ×1400	1450×1050 ×1500	1500×1250 ×1720	2000×1400 ×2100	2000×1600 ×2100

Dew Point	Relative Humidify(%)	Moisture Content
Dew Point	Relative Humidify(%)	PPM	%
+20	100	23.072	2.307
+10	52.50	12.117	1.212
0	26.10	6.027	0.603
-10	11.20	2.574	0.257
-20	4.40	1.025	0.103
-30	1.60	378	0.038
-40	0.60	128	0.013
-50	0.20	39	0.004

Model		XTL-300GN	XTL-300GE	XTL-450GE
Motor	Type	Carbon Brush	Carbon Brush	Induction
Motor	Specification	1100w1Φ	1100w1Φ	750w1Φ
Conveying Capacity		400kg/hr	350kg/hr	400kg/hr
Static wind pressure		1500mmAq	1500mmAq	1500mmAq
Filter		Φ185x115H	Φ185x90H	Φ185x90H
Volume of Material Hopper		6L	6L	6L
Inside Diameter of Conveying Pipe		Φ38mm	Φ38mm	Φ38mm
External	Main Body LWH	480x310x430mm	500x400x600mm	500x400x800mm
External	Material Hopper LWH	430x440x295mm	500x400x600mm	500x400x800mm
Weight	Main Body	15.5kg	13.5kg	18.5kg
Weight	Material Hopper	5kg	13.5kg	18.5kg

Specifications		XC-20WCl	XC-25WCl	XC-30WCl	XC-40WCl	XC-50WCl	XC-100WCl
Parameter
Model
Cooling capacity	Kcal/h	50000	60000	77600	101780	121400	246000
Compressor	All-closed Vorticity						Screw compressor
Compressor power	Kw	18	20.4	26.8	35	40	74
Refrigerant	R22
Chilled water pump power	Kw	1.5	1.5	2.2	7.5	7.5	8
Max Flow rate of chilled water	L/min	400	400	400	600	600	900
Flow water inlet and outlet pipe	″	2″	2″	2″	3″	3″	5″
Condensing water rate	L/min	≥240	≥300	≥300	≥340	≥400	≥800
Chilled water inlet and outlet pipe	″	2″	2″	2″	2″	2″	4″
Size length	(mm)	1700	1700	2100	2100	2300	2500
Size width	(mm)	950	1000	1100	1200	1400	1500
Size height	(mm)	1200	1300	1300	1500	1500	1700
Water tank capa	L	300	380	600	No water tanks (dry evaporator)
Weight	Kg	550	650	750	860	1200	2200

Specifications		XC-20WCl	XC-25WCl	XC-30WCl	XC-40WCl	XC-50WCl	XC-100WCl
Parameter
Model
Cooling capacity	Kcal/h	50000	60000	77600	101780	121400	246000
Compressor	All-closed Vorticity						Screw compressor
Compressor power	Kw	18	20.4	26.8	35	40	74
Refrigerant	R22
Chilled water pump power	Kw	1.5	1.5	2.2	7.5	7.5	8
Max Flow rate of chilled water	L/min	400	400	400	600	600	900
Flow water inlet and outlet pipe	″	2″	2″	2″	3″	3″	5″
Condensing water rate	L/min	≥240	≥300	≥300	≥340	≥400	≥800
Chilled water inlet and outlet pipe	″	2″	2″	2″	2″	2″	4″
Size length	(mm)	1700	1700	2100	2100	2300	2500
Size width	(mm)	950	1000	1100	1200	1400	1500
Size height	(mm)	1200	1300	1300	1500	1500	1700
Water tank capa	L	300	380	600	No water tanks (dry evaporator)
Weight	Kg	550	650	750	860	1200	2200

Model	Mono-Chrome Machine						Double-Chrome Machine
Type	XSM30-16	XSM30-14	XSM30-12	XSM75-16	XSM75-14	XSM75-12	XSM-D-30/30	XSM-D-30/75	XSM-D-75/75
Output quantity(kg/hr)	1.1~38	0.6~20	0.3~10	0.5~17	0.2~8	0.1~4	*	*	*
Motor power(W)	60	60	60	60	60	60	60×2
Rotation of motor (rpm)	0~3000	0~3000	0~3000	0~3000	0~3000	0~3000	0~3000
Material storage tube(L)	10	10	10	10	10	10	10
Outer diameter of screw bar	30：1	30：1	30：1	75：1	75：1	75：1	30:1/30/1	30:1/75:1	75:1/75:1
Reduction ratio(mm)	16	14	12	16	14	12	*	*	*
Main hopper	For selection						Standard
Stirrer	For selection						Standard
Power of stirrer	0.09KW
Voltage of stirrer	3 Ø,380V,50HZ
Main voltage	1Ø，220V,50HZ
External size	390						600
	530						910
	355						355
Weight(kg)	16						33

Type	Diameter	External size	Capacity	Heater Power	Blower Power	Applicable lnjectioner
XHD-12KG	φ280mm	640×430×780mm	15kg	2.1kw	90w	1oz.
XHD-25KG	φ350mm	760×500×900mm	25kg	3.5kw	90w	3oz.
XHD-50KG	φ430mm	840×540×1030mm	50kg	4.8kw	200w	5-8oz.
XHD-75KG	φ468mm	950×600×1140mm	75kg	5.1kw	200w	6-9oz.
XHD-100KG	φ550mm	1080×700×1250mm	100kg	7.8kw	250w	10-30oz.
XHD-150KG	φ630mm	1120×760×1300mm	150kg	8.88kw	250w	15-30oz.
XHD-200KG	φ700mm	1250×850×1480mm	200kg	10kw	400w	30-60oz.
XHD-300KG	φ750mm	1300×920×1740mm	300kg	15kw	750w	＞60oz.
XHD-400KG	φ800mm	1400×1040×1760mm	400kg	20kw	750w	＞60oz.
XHD-600KG	φ990mm	1600×1150×2150mm	600kg	27kw	960w	＞60oz.
XHD-800KG	φ1090mm	1700×1330×2660mm	800kg	32kw	960w	＞60oz.
XHD-1000KG	φ1090mm	1700×1330×2860mm	1000kg	32kw	960w	＞60oz.

Model	XHS50kg	XHS100kg
Power	380V 3Φ	380V 3Φ
Motor power	1.5kw	3kw
Mixing capacity	50kg/3min	100kg/3min
SIze(LxMxH)	860x740x1110mm	1200x1150x1480mm
Welght	150kg	230kg

Model	XFS-2124	XFS-2230	XFS-2840	XFS-3050	XFS-3460	XFS-4680	XFS-6100	XFS-5680	XFS-56100
Power(kw)	4	5.5	7.5	11	15	22	37	37	45
Quantity of rotating blades	12	15	21	21	24	30	39	30	39
Quantity of fixed blades	2	2	2	2	4	4	4	4	4
Screen size(mm)	i8	i10	i10	i10	i12	i12	i14	i12	i12
Weight(kg)	340	480	660	900	1400	1950	2500	3200	4100
Max.breaking capacity (kg/hr)	230 × 170	300 × 210	400 × 240	500 × 300	600 × 310	800 × 400	1000 × 400	800 × 660	1000 × 660
Size of feeding inlet (mm)	230 × 170	300 × 210	400 × 240	500 × 300	600 × 310	800 × 400	1000 × 400	800 × 660	1000 × 660
External size (mm)	1000 × 700 × 1050	1100 × 800 × 1200	1300 × 900 × 1400	1450 × 1050 × 1500	1500 × 1250 × 1720	2000 × 1400 × 2100	2000 × 1600 × 2100	2340 × 1820 × 2810	2340 × 2020 × 2810

Model		XFS 180 G-A	XFS 180G-B	XFS 230G
Kw	Power	2.2	2.2	3
No	Quantity of rotating blades	9	9	9
No	Quantity of fixed blades	2	2	2
mm	Screen size	Æ6-Æ8	Æ6-Æ8	Æ8
Kg	Weight	100	100	180
Kg/hr	Max. Breaking Capacity	120	120	200
mm	Size of feeding inlet	180x136	180x160	230x160
mm	External size	850x500x1000	850x720x1250	960x960x1250